Westinghouse dishwasher troubleshooting

Repairing the dishwasher with your own hands will save your budget from unnecessary costs. The table shows the main problems that can arise during the use of the device and it also lists methods which can be used to fix them.

Westinghouse SB907 dishwasher troubleshooting

ProblemSolution
The dishes are not clean• The wrong washing program has been selected.
• The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded.
• The spray arms do not rotate freely due to incorrect arrangement of the load.
• The filters in the base of the washing compartment are dirty or incorrectly positioned.
• Too little or no detergent has been used.
• The drain hose connection is not correct.
The dishes are wet and dull• Rinse aid was not used.
• The rinse aid dispenser is empty.
There are streaks, milky spots or a bluish coating on glasses and dishes• Decrease rinse aid dosing.
Water drops have dries onto glasses and dishes• Increase rinse aid dosing.
• The detergent may be the cause. Contact the detergent manufacturer’s consumer care line.

Westinghouse SB916 dishwasher troubleshooting

Fault codeMalfunctionPossible causeSolution
• continuous flashing of the light of the running programThe dishwasher does not fill with water• The water tap is blocked or furred with limescale• Clean the water tap
• “10” appears in the digital display• The water tap is turned off• Turn the water tap on
• The filter (where present) in the threaded hose fitting at the water inlet valve is blocked• Clean the filter in the threaded hose
• The water inlet hose has not been correctly laid or it is bent or squashed• Check the water inlet hose connection
• continuous flashing of the light of the running programThe dishwasher will not drain• The sink spigot is blocked• Clean out the sink spigot
• “20” appears in the digital display• The water drain hose has not been correctly laid or it is bent or squashed• Check the water drain hose connection
• continuous flashing of the light of the running programAnti-flood device is activated• Close the water tap and contact your local Customer Care Centre.
• “30” appears in the digital displayThe program does not start• The dishwasher door has not been properly closed• Close the door
• The main plug is not plugged in• Insert the main plug
• The fuse has blown out in the household fuse box• Replace the fuse
• Delay start has been set• If dishes are to be washed immediately, cancel the delay start