Westinghouse Dishwasher Error Codes
Westinghouse Dishwasher Error Fl
Leak detection. Switch off the dishwasher and close the tap.
Westinghouse Dishwasher Error F2
Draining fault
• Cancel program and power off machine, then check the following.
• Spigot on sink trap is clogged.
• Check if the drain spigot membrane has been removed.
• Drain hose is clogged.
• Filters of the dishwasher may be clogged.
Westinghouse Dishwasher Error F3
Water overfill. Close the tap.
Westinghouse Dishwasher Error F5
Water supply fault
• Make sur e the water tap is open and the main water supply is on.
• Close he tap, disconnect the hose and clean the filter at the tap connection end.
• Check the inlet hose is not kinked.
Westinghouse Dishwasher Error F6
Faulty heater sensor
Westinghouse Dishwasher Error F7
Overheating (water temperature too high).
Westinghouse Dishwasher Error F9
Flow control position error.
Westinghouse Dishwasher Error FE
Power supply fault. Restart the dishwasher.
Westinghouse Dishwasher Error Е10
The dishwasher does not fill with water
• The water tap is blocked or furred with limescale • Clean the water tap
• The water tap is turned off
• Turn the water tap on
• The filter (where present) in the threaded hose fitting at the water inlet valve is blocked
• Clean the filter in the threaded hose
• The water inlet hose has not been correctly laid or it is bent or squashed
• Check the water inlet hose connection
Westinghouse Dishwasher Error Е20
The dishwasher will not drain
• The sink spigot is blocked
• Clean out the sink spigot
• The water drain hose has not been correctly laid or it is bent or squashed
• Check the water drain hose connection
Westinghouse Dishwasher Error Е30
Anti-flood device is activated
• Close the water tap and contact your local Customer Care Centre.