Kenmore Dishwasher Error Codes

Kenmore Dishwasher Error IE

Kenmore Dishwasher Error Codes ie

Water inlet error

  • Correct water level (246) is not reached within 8 minutes after water is supplied or it does not reach the preset water level within 25 minutes.

Kenmore Dishwasher Error UE

Kenmore Dishwasher Error Codes ue

Unbalance error

  • The load is too small.
  • The appliance is tilted.
  • Laundry is gathered to one side.
  • Non distributable things are put into the drum.

Kenmore Dishwasher Error OE

Kenmore Dishwasher Error Codes oe

Drain error

  • Not fully drained within 10 minutes.

Kenmore Dishwasher Error FE

Kenmore Dishwasher Error Codes fe

Over flow error

  • Water is overflowing (water level frequency is over 213).
  • If 1 FE1 is displayed, the drain pump will operate to drain the water automatically.

Kenmore Dishwasher Error PE

Kenmore Dishwasher Error Codes pe

Pressure seneor error

  • The SENSOR SWITCH ASSEMBLY is out of order.

Kenmore Dishwasher Error dE

Kenmore Dishwasher Error Codes de

Door open error

  • Door not all the way closed.
  • Loose electrical connections at Door switch and PWB Assembly.
  • The DOOR SWITCH ASSEMBLY is out of order.

Kenmore Dishwasher Error tE

Kenmore Dishwasher Error Codes te

Heating error. The THERMISTOR is out order.

Kenmore Dishwasher Error LE

Kenmore Dishwasher Error Codes le

Locked motor error

  • The connector (3-pin, male, white) in the MOTOR HARNESS is not connected to the connector (3-pin, female, white) of STATOR ASSEMBLY.
  • The electric contact between the connectors (3-pin, male, white) in the MOTOR HARNESS and 4-pin, female, white connector in the MAIN PWB ASSEMBLY is bad or unstable.
  • The MOTOR HARNESS between the STATOR ASSEMBLY and MAIN PWB ASSEMBLY is cut (open circuited).
  • The hall sensor is out of order/defective.

Kenmore Dishwasher Error EE

Kenmore Dishwasher Error Codes ee

Eprom error

  • EEPROM is out of order.
  • Displayed only when the START/PAUSE button is first pressed in the QC Test Mode.

Kenmore Dishwasher Error PF

Kenmore Dishwasher Error Codes pf

Power failure. The washer experienced a power failure.

Kenmore Dishwasher Error AE

Kenmore Dishwasher Error Codes ae

Water leakage problem.

  • Turn off the water supply to the dishwasher and call costumer service.
  • The dishwasher makes an alert sound for 10 seconds, and runs the drain pumpintermittently. If power is turned off to the machine, the machine powers back on automatically until the AE error is resolved.

Kenmore Dishwasher Error FE

Kenmore Dishwasher Error Codes fe

Excessive water supplied. Please call costumer service

Kenmore Dishwasher Error HE

Kenmore Dishwasher Error Codes he

Heater circuit failure.

Kenmore Dishwasher Error nE

Kenmore Dishwasher Error Codes ne

Vario motor trouble