Indesit Dishwasher Error Codes

Indesit Dishwasher Error ‘Dry’ LED 3 flashing quickly

Fill time Time Out’ Inlet valve is faulty or water intake is restricted or water pressure too low.

Indesit Dishwasher Error ‘Rinse’ and ‘Dry’ LEDs 2 and 3 flashing quickly

Time out heating or not reached temperature Malfunction of temperature sensor or heating element.

Indesit Dishwasher Error ‘Main Wash’ LED 1 flashing quickly

Float Switch operated due to water in base Machine over filled or is leaking.

Indesit Dishwasher Error ‘Main’ and ‘Rinse’ LEDs 1 and 2 flashing quickly

Failure of temperature sensor Open circuit temperature sensor or wiring.

Indesit Dishwasher Error ‘Main’, ‘Rinse’ and ‘Dry’ LEDs 1,2 and 3 flashing quickly

Failure of temperature sensor Short circuit temperature sensor.

Indesit Dishwasher Error A06

Turn on the tap and the appliance will start after a few minutes.

The appliance lock has been activated because nothing was done when the beeps sounded. Switch off the machine using the ON/OFF button, turn on the tap and switch the machine back on after 20 seconds by pressing the same button. Re- programme the machine and restart the wash cycle.

Indesit Dishwasher Error A05

Switch off the machine by pressing the ON/OFF button and clean the filters then switch the dishwasher back on by pressing the same button. Re- programme the machine and restart the wash cycle.

Indesit Dishwasher Error A02

Switch off the appliance by pressing the ON/OFF button and switch it back on after a minute. If the alarm continues, turn off the water tap to reduce the risk of flooding, remove the plug from the electrical socket and call Assistance.